Home / Solutions
Solutions
Find parts by the job in front of you
Pick the kind of work you are doing. Each section lists the product lines to start from, a few tips for choosing, and an example parts list.
01 / Job type
Irrigation and landscape
Irrigation mainlines and laterals are built from pipe, socket fittings and a shutoff valve at each zone. We sell all three, so one order can cover the whole system. Send us your pipe sizes and run lengths and we will quote the full list.
Typical parts
- PVC Schedule 40 pipe1/2" to 6" (sizes vary by length and end type)
- PVC Schedule 40 fittings1/2" to 4" (some larger and special-purpose items on request)
- PVC ball valves1/2" to 2"
How to choose
- Match the schedule and size to the job. Mainlines usually run larger than laterals.
- Check the pressure and temperature ratings of the pipe, fittings and valves together.
- Use the right primer and cement for PVC, and follow the instructions on the can.
- Check local code before you buy.
Example starter list
Example only; quantities depend on your design.
One zone off a 1 in lateral
| Qty | Part |
|---|---|
| 4 | 1 in Schedule 40 pipe, 10 ft sticks |
| 6 | 1 in 90° elbows, slip × slip |
| 3 | 1 in tees, slip × slip × slip |
| 4 | 1 in couplings, slip × slip |
| 2 | 1 in male adapters, MPT × slip |
| 1 | 1 in compact ball valve, slip × slip |
Adds these lines to your quote list. You can change them on the next page.
02 / Job type
Pressure water and plumbing
Pressure water lines, pump and filter connections and utility plumbing use Schedule 40 pipe, fittings and valves. Gray Schedule 80 gives a heavier wall where the job needs it. Pick the schedule and size to match the pressure and temperature on your job.
Typical parts
- PVC Schedule 40 pipe1/2" to 6" (sizes vary by length and end type)
- PVC Schedule 40 fittings1/2" to 4" (some larger and special-purpose items on request)
- PVC Schedule 80 fittings1/2" to 3" (varies by item)
- PVC ball valves1/2" to 2"
How to choose
- Match the schedule and size to the job. Schedule 40 suits general pressure lines. Schedule 80 has a thicker wall.
- Check the pressure and temperature ratings of the pipe, fittings and valves together. Ratings drop as temperature rises.
- Use the right primer and cement, follow their instructions, and let joints cure as long as the can says before you pressure-test.
- Check local code for what your job requires. Ask us for the paperwork for the exact part number before you order.
Example starter list
Example only; quantities depend on your design.
Pump line, 1-1/2 in Schedule 40
| Qty | Part |
|---|---|
| 3 | 1-1/2 in Schedule 40 pipe, 10 ft sticks |
| 4 | 1-1/2 in 90° elbows, slip × slip |
| 2 | 1-1/2 in tees, slip × slip × slip |
| 2 | 1-1/2 in male adapters, MPT × slip |
| 1 | 1-1/2 in union, O-ring, slip × slip |
| 2 | 1-1/2 in compact ball valves, slip × slip |
Adds these lines to your quote list. You can change them on the next page.
03 / Job type
Drain, waste and vent
Drain, waste and vent (DWV) fittings build the gravity drain and vent lines inside a building. We sell white PVC and black ABS fittings, plus the traps, cleanouts and closet flanges that go with them. Your local code decides which material you can use.
Drainage and venting only. DWV fittings are not for pressure or potable water. For gravity sewer and storm pipe, ask us before you order.
Typical parts
Need pipe for the drain or vent runs? Ask us before you order.
How to choose
- Match the fitting type and size to the line you are building. Ask us if you are not sure which bend, wye or combo fits.
- Do not mix materials without checking. ABS and PVC need the correct transition cement where they meet.
- Use the right primer and cement, and follow the instructions on the can.
- Check local code. Some jurisdictions prefer PVC and others prefer ABS.
Example starter list
Example only; quantities depend on your design.
One bathroom, PVC DWV
| Qty | Part |
|---|---|
| 1 | 4 × 3 in closet flange, hub |
| 2 | 3 in long sweep 1/4 bends, hub × hub |
| 1 | 3 in wye, all hub |
| 1 | 2 in P-trap, hub × hub |
| 2 | 2 in 1/8 bends (45°), hub × hub |
| – | Pipe for the runs: send us the sizes and lengths |
Adds these lines to your quote list. You can change them on the next page.
04 / Job type
Industrial and maintenance
Pump connections, process lines and plant maintenance often call for a heavier wall than Schedule 40. Gray Schedule 80 fittings, with ball valves for shutoff, cover a lot of that work. Check the pressure, the temperature and the fluid in the line before you choose.
Typical parts
- PVC Schedule 80 fittings1/2" to 3" (varies by item)
- PVC ball valves1/2" to 2"
- PVC Schedule 40 pipe1/2" to 6" (sizes vary by length and end type)
Need a size or schedule that is not on the site? Ask us.
How to choose
- Match the schedule and size to the job. Schedule 80 has a thicker wall than Schedule 40.
- Check the pressure and temperature ratings of the pipe, fittings and valves together. The weakest part sets the limit.
- Check that PVC suits the fluid in your line. If you are unsure, ask the fluid supplier.
- Use the right primer and cement, follow the instructions on the can, and check local code and site rules.
Example starter list
Example only; quantities depend on your design.
Pump connection, 2 in Schedule 80
| Qty | Part |
|---|---|
| 4 | 2 in Schedule 80 90° elbows, slip × slip |
| 2 | 2 in Schedule 80 tees, slip × slip × slip |
| 4 | 2 in Schedule 80 couplings, slip × slip |
| 2 | 2 in Schedule 80 unions, O-ring seal, slip × slip (price on request) |
| 2 | 2 in Schedule 80 male adapters, MPT × slip |
| 2 | 2 in compact ball valves, slip × slip |
Adds these lines to your quote list. You can change them on the next page.
05 / By customer type
What you get, by type of buyer
Public prices are open to everyone. Orders of $750 and up can move to a wholesale account.
Plumbing and mechanical contractors
PricingPublic prices for small orders. A wholesale account for single orders of $750 and up.
Will-callOrder ahead and pick up at the counter on your way to the job.
FreightWe quote the freight before it ships.
Irrigation installers
PricingPipe by the stick and fittings by the piece at public prices. Wholesale fittings are sold by the full carton.
Will-callPick up valves and fittings for the next zone without waiting on a truck.
FreightPipe sticks ship by freight carrier. Send your ZIP code and we quote it.
General contractors and builders
PricingOne materials list, priced on the public list or on wholesale tiers once you have an account.
Will-callLoad at our counter, or send your own truck or carrier to our dock. Same prices.
FreightWe arrange LTL, truckload or parcel freight and quote it first.
Resellers and small distributors
PricingThree wholesale price columns by order total: $750, $2,500 and $7,500. Same prices for every wholesale customer.
Will-callPick up at the counter at the same wholesale prices.
FreightBilled at actual carrier cost as its own line. No free-freight program.
Got a job to price?
Send us your materials list and your ZIP code. We reply with a quote and the freight.